ADCIRC>=v55 is required in order to use the NWS=13
Parameters #
NWS : set to 13 or the equivalent if coupling to SWAN, etc.
WTIMINC : configurable grid-to-mesh interpolation timestep in seconds, separate from the input data timesteps. If the file contains storm-following grids, there may be some utility in setting this finer than the input timestep(s).
If running the padcswan coupled ADCIRC+SWAN model, the wave coupling timestep can also be included here, as is normally done.
Additional Namelist #
&owiWindNetcdf # fort.15 namelist with all inputs quoted as strings
# REQUIRED cold start time of simulation formatted as 'YYYYMMDD.HHMMSS'
NWS13ColdStartString='YYYYMMDD.HHMMSS',
# OPTIONAL wind speed multiplier (DWM from NWS12),
# generally should set to 1 for OWI winds...
NWS13WindMultiplier=1.0,
# OPTIONAL file name for netCDF file ( fort.22.nc default )
NWS13File='fort.22.nc',
# OPTIONAL group # to use for Powell drag (containing clon/clat vars)
NWS13GroupForPowell=1,
/
Example Namelist from a fort.15
#
&owiWindNetcdf
NWS13File='cyclone_test1.nc',
NWS13ColdStartString='20000706.000000'
/